Alocasia Cuprea Plant Care Guide

Table of Contents

Alocasia Cuprea or Alocasia Red Secret or Mirror Plant is a member of the Araceae family. The history of Alocasia Cuprea as a cultivar is not well-documented, but it was thought to have been introduced to Western cultivation in the 1800s.

Cuprea refers to the copper appearance of the leaves. The foliage is reflective which is why it is sometimes referred to as Mirror Plant.

Alocasia Cuprea care at a glance.

🪴 Appearance of Alocasia Cuprea

Alocasia Cuprea

The Alocasia Cuprea has heart-shaped, copper leaves. Depending on how the light is hitting, the leaves could appear green or golden on the front. The back side of the leaf looks like a deep purple. The stem is of a more translucent, yellowy-green colour (similar to the Alocasia Black Velvet).

☀️ Light Needs

Alocasia Cuprea thrives in bright, indirect, medium-bright light. In the wild, Alocasia Cuprea grows under the canopy of trees and receives filtered sunlight. In comparison to some other Alocasia species, it can tolerate lower light levels.

At home, Alocasia Cuprea thrive in bright, east or north-facing windows. They require indirect light for several hours a day. Direct sunlight can cause damage to the leaves.

Shiny New Alocasia Cuprea Leaf in middle of room
Where my Alocasia Cuprea is Located

🌡️ Temperature & Humidity 🌫️

Alocasia Cuprea like temperatures between 15-30 degrees celsius, and high humidity (60%).

When thinking about humidity, you can think about where the plant is native to and where it grows. Is it in a rainforest with high humidity? If yes, you will likely need a humidifier, and to set it somewhere between 40 and 60 humidity. I use two Levoit humidifiers on opposite sides of my apartment: the Levoit Hybrid Ultrasonic Humidifier (LV600HH) and Levoit VeSync Classic (300S) Ultrasonic Humidifier. This allows me to set my preferred humidity level, and read the display so I know how humid my apartment is at all times. A moisture meter is also helpful for this.

🌱 How Does Alocasia Curpea Grow?

Like other alocasias, the new leaves of the Alocasia Cuprea grow in a petiole, from the centre of the base of the plant. The petiole for the Alocasia Cuprea is sort of orange. It grows up straight, with a curled leaf, and slowly opens itself up to the sun.

The foliage is quite copper and brown when it is newer and darkens to a look a bit more green with copper and gold, or even brown looking in certain lights. It is a deeper purple in the back. Overtime the purple on the underside of the leaf fades.

Alocasia Cuprea can grow up to 30 to 50 cm (12 to 18 inches).

New Alocaisa Cuprea Leaf
Fresh Alocasia Cuprea Leaf

🌸 Does Alocasia Cuprea Bloom?

Alocasia Cuprea can bloom, but it would direct its energy to the flower instead of new foliage. If you want new foliage, you can prune the bloom. It will only bloom when it reaches maturity, which can take several years.

Alocasia Cuprea Fine Art Prints Available

✂️ How Do You Propagate Alocasia Cuprea?

Propagation is done by corms. Sometimes new plants may emerge from the soil (grown from a corm), but most of the time you will find the corms near the roots of the plant. You will have to detangle the corms from the roots and place them in a bit of a humidity chamber or prop box. I just used a glass tupperware container with a lid and a bit of water, filled up half of the height of the corms. It is important to change the water every now and then to avoid algae buildup and molding.

If you used the humidity chamber method, once roots have grown you can pot the corm in soil. I personally wait until I see a petiole to be sure and then pot that in a well draining soil.

In the case of my Alocasia Cuprea, it just started to grow a baby in its current pot (its pretty cute) from the corm you see in the soil below.

The corm kind of looks like an onion here
Alocasia Cuprea Baby
Cute Alocasia Cuprea Baby

💧 How to Water Alocasia Cuprea

When the top half of the soil is dry. I typically bottom water this plant through the drainage hole of the pot on a tray. It’s the easiest way to know if your plant is thirsty or not. Overwatering can lead to fungus gnats, root rot, or the death of your plant.

You can top water, but it’s best to do so in a pot with drainage until water is flowing out of the hole. If your pot doesn’t have drainage, you might accidentally drown your plant or make some fungus gnats very happy.

You should top water from time to time to make sure any built up minerals can wash through the plant. The water should drip out of the bottom of your drainage hole.

🪳 Pests & Problems 😔

  • Spider Mites: If you see webbing or or signs of damage on my leaves, spider mites may have taken to your plant. I spray the plant with a mixture of neem oildish soap and water. I repeat this about once or twice a week (depending on the severity of infestation) for about a month. It’s also good to do this preventatively once a month or so.
  • Drooping Leaves: Your plant is likely thirsty. Just give it a little water and it should be as good as new.
  • Yellowing Leaves: If you have a new leaf coming in, your plant is likely fine. Plants pull energy from older leaves to support new growth. But it can also indicate over- or under- watering or lighting issues.
  • Mealy Bugs: these look like little white cotton balls on the plant. You can remove these with your fingers if you catch them early enough, but I would use a cotton swab with a drop of Isopropyl alcohol and try to scrape them off the stem.
  • Fungus gnats: Spray the plant with a mixture of neem oildish soap and water. I also let the soil dry out and add dryer sheets on top of the soil so the gnats can’t sense the moisture on the soil.
  • Thrips: these are little, dark bugs that look like dirt. They suck the life out of the leaves, and lay eggs within the tissue of the leaf. As they age, they can grow wings and infect other plants. I spray the plant with a mixture of neem oil, dish soap and water. I repeat this every few days to try and get both the pest and the eggs. Sometimes I just chop the affected leaf since they are hard to eradicate. Complete guide on how to get rid of thrips.

🪴 When To Repot Alocasia Cuprea?

Signs your plant needs to be repotted include:

  1. Roots growing out of the drainage holes
  2. Its been 1.5 to 2 years and it could use a soil refresh
  3. It looks a lot bigger than its current pot

For help repotting, watch my repotting guide specific to this Alocasia below.

☢️ Are Alocasia Cuprea Toxic?

Alocasia are toxic to humans and pets if ingested as it contains calcium oxalate crystals. These crystals can cause swelling and irritation of the mouth, throat and digestive system if eaten. Some individuals are even allergic to the sap or juice of the plant, causing skin irritation.

Alocasia Cuprea Quick Care Guide

Scientific NameAlocasia Cuprea
NicknameAlocasia Red Secret or Mirror Plant
OriginsBorneo
LightBright, indirect, medium-light
Temperature15-30 degrees celsius
HumidityHigh humidity (60-80%)
HeightUp to 18″
BloomsYes
PropagateCorms
Water FrequencyWhen half-dry (likely once a week)
PestsSpider Mites, Thrips, Mealy Bugs, Fungus Gnats
Common ProblemsOverwatering, Underwatering, Yellowing Leaves, No Leaves
ToxicityModerate (not safe when ingested)

Everything you need to keep your plants alive and thriving 🌱

Plant portraits for your home 🏠

Setting up automated systems to keep your plants alive while on vacation ✈️

Related Posts

ZZ Plant or Zamioculcas zamiifolia is a member of the Araceae family. It is native to East Africa. Zamioculcas
Tiger Jaws Succulent or Faucaria tigrina is a member of the Aizoaceae family. It is native to South Africa.
Thanksgiving Cactus or Schlumbergera truncata is a member of the Cactaceae family and the Schlumbergera genus. It is native